Lightweight Upright Vacuum Cleaner - How To Correctly Maintain A Vacuum Cleaner
View PDF | Print View
by: Rachelle Gordon
Total views: 0
Word Count: 508
Date: Fri, 30 Jul 2010 Time: 2:58 AM
0 comments
Should you possess a cleaning business, you recognize how crucial preserving your vacuum cleaner fleet could be. Correctly maintained vacuum cleaners could conserve valuable time and labor while keeping your clients floors looking excellent. Maintaining your vacuum cleaner suction system away from debris and obstacles could improve the life of your vacuums motors in turn saving you cash on internal parts and labor. A simple monthly inspection can save you time and cash while increasing your vacuum cleaners efficiency.
The first thing to inspect on your vacuum cleaner may be the cord. Check for just about any cracks or kinks in the cord and make sure the cord connection towards the vacuum is tightly secured into the vacuums' body. A cracked or twisted cord could be an electrical hazard for your cleaning crew and people close to the work area. If the cord is cracked and bare wire is exposed replace the cord immediately.
The next region to verify about the vacuum cleaner is the filtration program. On a filter bag system, verify for just about any blockages on the incoming suction tube and also the exhaust port. If your vacuum has any internal filters check for filter blockage and replace or clean them if they are dirty. Some vacuum cleaners have clips that old the filter bag in place, check to determine if clips are cracked or bent and if so replace them immediately. When the filter bag is not sealed on the intake port, debris could get into the vacuums' motor and impede the performance of the vacuum cleaner.
If everything checks out within the filter compartment then its time to move to the underside from the vacuum cleaner. Lay the vacuum cleaner on the ground and roll it over to expose the beater bar and suction area of the vacuum. Make sure the intake suction tube is not blocked by debris that can cause a strain on the vacuum belt and prematurely burn out the motor. Check the beater bar for any cotton or fibers that may be wrapped around it. If material is wound around the beater bar, cut it off carefully utilizing a pair of scissors while being careful not to cut the beater bar bristles. Spin the beater bar and listen for squeaks or grinding in the beater bar bearings. The beater bar should roll smoothly with light resistance from the belt. When the beater bar doesn't roll smoothly, have a vacuum technician inspect it and and if required, replace the bearings.
The final part of the inspection process is really a quick look over the outer shell of the vacuum cleaner. Verify for cracks or protruding parts and then roll the vacuum to see if it moves smoothly. If every thing checks out then it ought to be good for another month of great service. On higher priced vacuum cleaners repair costs can amount to up to 500 dollars. A regular vacuum inspection can keep these expenses down and your cleaning business running smoother.
About the Author
If you want more information on Lightweight Vacuum Cleaners, don't read just rehashed articles online to avoid getting ripped off. Go here: Lightweight Upright Vacuum Cleaner
Rating: Not yet rated
